Comparazione prodotti

Frequency range: 100 kHz ~ 13.5 GHz
Ports: 4
Frequency resolution: 1 Hz

Level resolution: 0.05 dB
Range of IFBW: 1 Hz ~ 10 MHz
Setting range of output level: -55 dBm ~ +10 dBm

Dynamic range: 135 dB
Bias-Tees: support
Interface: LAN, USB Device, USB Host (USB-GPIB)

Remote control: SCPI/Labview/IVI based on USB-TMC/VXI-11/Socket/Telnet/WebServer
Display: 12.1" touch screen
Video output: HDMI/DVI-D/DP

Types of calibration: Response calibration, Enhanced Response calibration, Full-one port calibration, Full-two port calibration, Full-three port calibration, Full-four port calibration, TRL calibration

Types of measurement: Scattering-parameter measurement, differential-parameter measurement, receiver measurement, time-domain parameter analysis, limit test, ripple test, impedance conversion, fixture simulation, adapter removal/insertion, enhanced time-domain parameter analysis (TDR), spectrum analysis, frequency offset, scalar mixer measurement, pulse measurement, Material Measurement

Bandwidth: 2 GHz
Channels: 8+EXT
Sampling rate (Max.): 5 GSa/s (10 GSa/s ESR) @ each channel

Memory Depth (Max.): 500 Mpts/ch (single-channel), 250 Mpts/ch (dual-channel), 125 Mpts/ch (3 or 4 channels)
Vertical resolution: 8-bit (up to 12-bit in ERES mode, equivalent to 16-bit Hi-Res mode)

SYNC-64 to Synchronize 64 x SDS6000L
Waveform capture rate up to 750,000 wfm/s (Sequence mode)

Serial bus triggering and decoder, supports I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT and Manchester

Digital channel (optional)
Waveform generator (optional)
I/O: HDMI (1280*800), USB 3.0 Host x2, USB 2.0 Host x2, USB 2.0 Device (USBTMC), 1000M LAN (SCPI over VXI-11, SCPI over Telnet (port:5024), SCPI over Socket (port:5025), micro SD card, External trigger, Auxiliary output (TRIG OUT,PASS / FAIL), 10 MHz In, 10 MHz Out