ARRAY
3665A

Alimentatore DC programmabile, 0-200 V, 0-2.5 A, è caratterizzato da un'uscita a basso ripple e rumore, display LCD, supporto SCPI ed interfaccia seriale. RS232, USB e GPIB opzionali.

Il costo di trasporto indicato può variare in funzione del numero dei colli

Output ratings
- voltage: 0 to 200 V
- current: 0 to 2.5 A

Ripple and Noise (20 Hz to 20 MHz)
- voltage?root mean square value): < 20 mV
- voltage?peak-to-peak value): < 80 mVpp
- current: < 4 mA
- common mode current: 1.5 mA

Load regulation
- voltage: 10 mV
- current: 1 mA

Line regulation
- voltage: 10 mV
- current: 1 mA

Stability
- voltage: 0.02% + 5 mV
- current: 0.02% + 2 mA

Provides CV and CC operating modes, switching automatically
The output voltage and output current are continuously adjustable from 0 to the maximum rating values

The maximum rating current can be achieved at 10mV. Equipped with SENSE terminals to compensate for the line loss
High power factor, high efficiency, wide line voltage range as well as low output ripple and noise
Multi-group setting parameters storage and recall

SCPI (Standard Commands for Programmable Instruments) compatibility
Reliable input/output protections guarantee the effective operation in severe environment

Dimensions: 226 x 110 x 376 mm
Weight: 5.5 kg